Remote Node Configuration; Remote Node Setup; Figure 7-1 Menu 11 - Remote Node Setup; Figure 7-2 Menu 11.1 - Remote Node Profile - ZyXEL Communications Prestige 1600 Configuration Manual

This chapter shows you how to configure the profile and TCP/IP parameters of a remote node.
A remote node is required for placing calls to a remote gateway. A remote node represents both the gateway and
the network behind it across a WAN connection. Note that when you use Menu 4 to set up Internet access, you are
actually configuring a remote node.
7.1

Remote Node Setup

Select menu option 11 from the Main Menu to enter Menu11.1 Remote Node Profile as shown next.
Enter a remote node index number to bring up the following screen.
Rem Node Name= myISP
Active= Yes
Outgoing:
My Login= scci
My Password= ********
Authen= CHAP/PAP
Press ENTER to CONFIRM or ESC to CANCEL:
Leave name field blank to delete profile
Please enter 0-9, a-z, A-Z, '-', or '_', or leave blank to DELETE profile

Remote Node Configuration

Remote Node Configuration
Menu 11 - Remote Node Setup
1. ChangeMe (ISP, NAT)
2. ________
3. ________
Figure 7-1 Menu 11 – Remote Node Setup
Menu 11.1 - Remote Node Profile
Edit PPP Options= No
Rem IP Addr= ?
Edit IP = No
Telco Option:
Edit Frame Relay Options= No
Input Filter Sets:
Protocol filters =
Device filters =
Output Filter Sets=
Protocol filters =
Device filters =

Figure 7-2 Menu 11.1 - Remote Node Profile

Prestige 1600 Universal Access Concentrator
Enter Node # to Edit:
Chapter 7
7-1