Snmp Traps; Figure 11-2 Menu 22 - Snmp Configuration; Table 11-1 Snmp Configuration Menu Fields - ZyXEL Communications Prestige 1600 Configuration Manual

Press ENTER to Confirm or ESC to Cancel:
The following table describes the SNMP configuration parameters.
Field
Get Community
Set Community
Trusted Host
Trap: Community
Trap: Destination
Once you have completed filling in Menu 22 - SNMP Configuration, press [ENTER] at the
message "Press ENTER to Confirm..." to save your configuration, or press [ESC] to cancel.
11.4

SNMP Traps

P1600 will send traps to the SNMP manager when any one of the following events occurs:
1. coldStart (defined in RFC-1215) :
When the machine coldstarts, a trap will be sent after booting (power on).
2. warmStart (defined in RFC-1215) :
When the machine warmstarts, a trap will be sent after booting (software reboot).
3. linkDown (defined in RFC-1215) :
When any of the links is down, a trap will be sent with the port number. The port number is its interface index under
the interface group.
Port 1 : Ethernet LAN
SNMP Configuration
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Hgst= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0

Figure 11-2 Menu 22 - SNMP Configuration

Table 11-1 SNMP Configuration Menu Fields

Enter the Get Community, which is the password for the
incoming Get- and GetNext- requests from the management
station.
Enter the set community, which is the password for
incoming Set requests from the management station.
If you enter a trusted host, your Prestige 1600 will only
respond to SNMP messages from this address. If you leave
the field blank (default), your Prestige 1600 will respond to
all SNMP messages it receives, regardless of source.
Enter the trap community, which is the password sent with
each trap to the SNMP manager.
Enter the IP address of the station to send your SNMP traps
to.
Prestige 1600 Universal Access Concentrator
Description Option
Public
Public
Blank
Public
Blank
11-3