Table of Contents
Advertisement
You can choose up to four IP Policy sets (from twelve) by entering their numbers separated by commas, e.g., 2, 4,
7, 9.
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
16.3.2 DSL IP Routing Policies
Go to Menu 6.1 and enter the number(s) of the IP Routing Policy set(s) as appropriate. You can cascade up to four
policy sets by entering their numbers separated by commas.
Press Space Bar to Toggle.
16.4
IP Policy Routing Example
If a network has both Internet and remote node connections, you can route Web packets to the Internet using one
policy and route FTP packets to a remote network using another policy. See the next figure.
IP Policy Routing
Menu 3.2 - TCP/IP Ethernet Setup
TCP/IP Setup:
IP Address= 192.68.0.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2B
Multicast = IGMP-v2
IP Policies= 2,4,7,9
Figure 16-4 Ethernet IP Policies
Menu 6.1 - Port Usage
Active= Yes
Device Type: IDSL
Speed= 128K
Encapsulation= PPP
Authen Method:
Protocol= None
User Name=
Password= ********
IP Address Assigned to Client= 192.168.255.1
Start of Public IP Address= 0.0.0.0
IP Count= 0
Multicast=
IP Policies= 1,2,3,4
Press ENTER to Confirm or ESC to Cancel:
Figure 16-5 IDSL IP Routing Policies
Prestige 1600 Universal Access Concentrator
Enter your
IP Policy
Sets here
Enter your
IP Policy
Sets here
16-5
Advertisement
Table of Contents
Troubleshooting
