Figure 5-2 Menu 4 - Internet Access Setup; Table 5-4 Internet Access Setup Menu Fields - ZyXEL Communications Prestige 1600 Configuration Manual

Prestige 1600 Universal Access Concentrator
Table 5-4 contains instructions on how to configure your Prestige 1600 for Internet access.
Field
ISP's Name
My Login
Name
My Password
Network
Address
Translation
My WAN Addr Some implementations, especially the UNIX derivatives,
Address
Mapping Set
Edit Frame
Relay Options
Press [ENTER] at the message "Press ENTER to Confirm..." to confirm your configuration,
or press [ESC] at any time to cancel.
5-6
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
My Login= 1234
My Password= ********
Network Address Translation= SUA Only
My WAN Addr= 0.0.0.0
Address Mapping Set= N/A
Edit Frame Relay Options= No
Press ENTER to Confirm or ESC to Cancel:

Figure 5-2 Menu 4 - Internet Access Setup

Table 5-4 Internet Access Setup Menu Fields

Description
Enter the name of your Internet Service Provider. (This
information is for identification purposes only.)
Enter the login name assigned to you by your ISP.
Enter the password associated with the login name
above. Note that this login name/password pair is only for
your Prestige 1600 to connect to the ISP's gateway. For
TCP/IP applications, e.g., FTP, you will need a separate
login name and password for each server.
See the NAT Chapter for more details on this field and
Address Mapping Set below.
require the WAN link to have a separate IP network
number from the LAN and each end must have a unique
address within the WAN network number. If this is the
case, enter the IP address assigned to the WAN port of
your Prestige 1600.
Note that this is the address assigned to your local
Prestige 1600, not the remote router.
See the NAT Chapter
Please see the WAN Port Setup chapter for a full
discussion of this feature.
Observation
myISP
(required)
(required)
nternet Access
I