Secondary And Standalone Main Menu; Changing The System Password; Figure 3-4 Secondary And Standalone Main Menu; Figure 3-5 Menu 23 - System Security - ZyXEL Communications Prestige 1600 Configuration Manual

99 Exit
3.3.2

Secondary and Standalone Main Menu

The SMT Main Menu for the secondary and standalone Prestige models is as shown next.
Getting Started
1. General Setup
3. Ethernet Setup
6. Port Setup
Advanced Applications
12. Static Routing Setup
15. NAT Setup
Enter Menu Selection Number:
Note: You will see the above screen when you set Configuration Type in Menu 1- General Setup as
3.4

Changing the System Password

The first thing you should do before anything else is to change the default system password by doing the following:
Select option 23 from the Main Menu. This will open Menu 23 - System Security as shown:
Step 1.
Step 2. From the System Security Menu, select Change Password to bring up Menu 23.1 - System Security -
Change Password.
Step 3. When submenu 23.1- System Security-Change Password appears, as shown below, enter the existing
system password, i.e., 1234, then press [ENTER].
Initial Setup
To exit the SMT and return to a blank screen.
Copyright (c) 2000 ZyXEL Communications Corp.
Prestige 1600 Main Menu (MySeconda)

Figure 3-4 Secondary and Standalone Main Menu

secondary or standalone.
Menu 23 - System Security
1. Change Password
2. External Server
Enter Menu Selection Number

Figure 3-5 Menu 23 - System Security

Prestige 1600 Universal Access Concentrator
Advanced Management
21. Filter Set Configuration
22. SNMP Configuration
23. System Security
24. System Maintenance
25. IP Routing Policy Setup
99. Exit
3-5