Ci Commands; Command Syntax - ZyXEL Communications Prestige 1600 Configuration Manual

Use Menu 24.8 to enter command line mode. Please refer to the section 14.6 Command Interpreter Mode for
details about the SMT menu. The following table describes the syntax used to configure your Prestige using
Command Interface (CI) commands. For details on other CI commands to configure your Prestige, please consult
the supporting CD.
ZyXEL recommends that you use CI Commands for debugging purposes only. You are advised to

Command Syntax

CI user interface uses the following syntax:
command < iface | device > subcommand [Parma]
command subcommand [Parma]
command ? | help
command subcommand ? | help
[channel-name]: enet0 for Ethernet port, wan00 for WAN port (only available in P1600 primary), xdsln
[iface-name]: enif0 for Ethernet port, wanif0 for WAN port (only available in P1600 primary), wanifn
System Related Commands
CI Command
sys
cbuf
cpu
dir
edit
errctl
event
feature
fid

CI Commands

configure the Prestige through menu interface.
(n=00~31) for xDSL port
(n=01~32) for IDSL port
Options
cnt disp
clear
disp [a|f|u]
disp
<filename>
[level]
display
trace [display|clear]
display
Prestige 1600 Universal Access Concentrator
CI Commands
Description
Display cbuf static
Clear cbuf static
Display cbuf a: all f: free u: used
Display CPU utilization
Display file directory
Edit a text file
Set the error control level
0:crash no save, not in debug mode
(default)
1:crash no save, in debug mode
2:crash save, not in debug mode
3:crash save, in debug mode
Display tag flags information
Display system event information
Display feature bit
Display function id list
A