Chapter 3 Initial Setup; Initial Screen; Password; Figure 3-1 Power-On Display - ZyXEL Communications Prestige 1600 Configuration Manual

3.1

Initial Screen

When you power on your Prestige 1600, the router performs several internal tests and initializes the ports. After the
initialization, the Prestige asks you to press [ENTER] to continue, as shown below:
3.1.1

Password

After you press [ENTER], the Login screen appears prompting you to enter the password, as shown in the next
figure.
For your first login, enter the default password 1234. As you enter the password, the screen displays an (X) for
each character you type.
Please note that if there is no activity for longer than 5 minutes after you log in, your Prestige will automatically log
you out and will display a blank screen. If you see a blank screen, press [ENTER] to bring up the password screen
again.
Initial Setup
This chapter shows you how to perform initial setup using the SMT.
Copyright (c) 2000 ZyXEL Communications Corp.
ethernet address: 00:a0:c5:00:50:02
Press ENTER to continue...

Figure 3-1 Power-On Display

Enter Password : XXXX

Figure 3-2 Login Screen

Prestige 1600 Universal Access Concentrator
Chapter 3
Initial Setup
3-1