Table 12-3 Accounting Attributes - ZyXEL Communications Prestige 1600 Configuration Manual

Prestige 1600 Universal Access Concentrator
The following table describes the accounting attributes mentioned in the above example.
Field
Acct-Status-Type
Acct-Session-Id
User-Name
NAS-Port
NAS-Port-DNIS
Caller Id
Acct-Input-Octets
Acct-Output-Octets
Acct-Session-Time
12-6
Accounting attributes may vary depending on the external server.

Table 12-3 Accounting Attributes

Account Status Type has four values: Accounting On,
Accounting Off, Start and Stop.
An Accounting On message is sent when the Prestige starts the
RADIUS Accounting service. An Accounting Off message is sent
when the Prestige ends the service.
A Start message is sent when a user session begins. A Stop
message is sent when the session ends.
Account Session Id is a unique number assigned to each
session to make it easy to match the Start and Stop records in a
detail file, and to eliminate duplicate records.
Note that in the above example this value matches in the Start
and Stop record, indicating that these records correspond to the
same session.
Specifies the user name.
Refers to the Network Access Server (NAS), i.e., the Prestige,
port used in the connection.
Refers to the called party's directory number.
Refers to the dial-in user's directory number.
This is the number of inbound bytes.
This is the number of outbound bytes.
This is the length of the session in seconds.
Description
RADIUS Support