Select option 2 from the Main Menu by typing 2 at the menu selection number prompt. You will see a screen as
shown next.
Field
Clock Source
Port Speed
Edit Frame Relay
Setup
4.1
Configuring The WAN Port For PPP over HDLC
The following diagram depicts the configuration scenario for running PPP over HDLC (High-level Data Link
Control).
WAN Port Setup
This section describes setting up your WAN port including Frame Relay.
Menu 2 - WAN Port Setup
Clock Source = External
Port Speed = N/A
Edit Frame Relay Setup= No
Press Enter to Confirm or ESC to Cancel:
Figure 4-1 Menu 2 - WAN Port Setup
Table 4-1 WAN Setup Menu Fields
The device connected to the WAN port controls timing. The
P1600 currently only supports an external clock source.
Set by External Device
To configure the WAN port for frame relay move the cursor
to the Edit Frame Relay Setup= field, press the
[SPACEBAR] once to display Yes and then press
[ENTER]. This takes you to Menu 2.1.2 - Frame Relay
Setup shown ahead.
Prestige 1600 Universal Access Concentrator
WAN Port Setup
Only change the default option
(No) if you wish to configure the
WAN port for frame relay.
Description
Chapter 4
Example
External
N/A
4-1