To use the Ethernet port for Internet Access, go to Menu 12 - IP Static Route Setup to set up the static default
route using a P1600 standalone. Please refer to the chapter on Remote Node Configuration for more details.
NAT
Figure 9-19 Ethernet SUA
Menu 3.2 - TCP/IP Setup
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2B
Multicast= N/A
IP Policies=
Network Address Translation= Full Feature
Address Mapping Set= 2
Press ENTER to Confirm or ESC to Cancel:
Figure 9-20 Applying NAT on the LAN Port
Prestige 1600 Universal Access Concentrator
9-15