ZyXEL Communications Prestige 1600 Configuration Manual page 152

Prestige 1600 Universal Access Concentrator
Ethernet Related CI Command
CI Command
ether
config
driver
ether driver
debug
version
H
Options
cnt disp <ch-name>
clear <ch-name>
mac <macaddr>
reg
status <ch-name>
rxmod
<mode>
disp <ch-name>
level <ch-name> <level>
arp [ip-addr]
disp event [ch-name] [on|off]
disp packet [1|2|3]
sap
Description
display LAN configuration information
display ether driver counters
ch-name: enet0, enet1
Set LAN Mac address
display LAN hardware related registers
ch-name: enet0, enet1
set LAN receive mode.
mode: 1: turn off receiving
2: receive only packets of this interface
3: mode 2+ broadcast
5: mode 2 + multicast
6: all packets
display ethernet debug infomation
display ethernet debug infomation
set the ethernet debug level
level 0: disable debug log
level 1:enable debug log (default)
CI Commands