Advanced Voip Settings Configuration; Table 20 Voip - ZyXEL Communications Prestige 2302R User Manual

Prestige 2302R Series User's Guide

Table 20 VoIP

LABEL
SIP Account
Active
SIP Number
SIP Local Port
SIP Server
Address
SIP Server Port
REGISTER
Server Address
REGISTER
Server Port
SIP Service
Domain
Authentication
User ID
Authentication
Password
Block Caller ID
Incoming Call
apply to
Advanced
Settings
Apply
Reset

7.3 Advanced VoIP Settings Configuration

Click VoIP in the navigation panel, select a SIP account and then click Settings to display the
following screen.
94
DESCRIPTION
You can configure the Prestige to use multiple SIP accounts. Select one to configure
its settings on the Prestige.
Select this check box to have the Prestige use this SIP account. Clear the check box
to have the Prestige not use this SIP account.
Enter your SIP number in this field (use the number or text that comes before the @
symbol in a full SIP URI). You can use up to 127 ASCII characters.
Use this field to configure the Prestige's listening port for SIP. Leave this field set to
the default if you were not given a local port number for SIP.
Type the IP address or domain name of the SIP server in this field. It doesn't matter
whether the SIP server is a proxy, redirect or register server. You can use up to 95
ASCII characters.
Enter the SIP server's listening port for SIP in this field. Leave this field set to the
default if your VoIP service provider did not give you a server port number for SIP.
Enter the SIP register server's IP address or domain name in this field. You can use
up to 95 ASCII characters.
If you were not given a register server address, then enter the address from the
SIP Server Address field again here.
Enter the SIP register server's listening port for SIP in this field.
If you were not given a register server port, then enter the port from the SIP
Enter the SIP service domain name in this field (the domain name that comes after
the @ symbol in a full SIP URI). You can use up to 127 ASCII Extended set
characters.
This is the user name for registering this SIP account with the SIP register server.
Type the user name exactly as it was given to you. You can use up to 95 ASCII
characters.
Type the password associated with the user name above. You can use up to 95
ASCII Extended set characters.
Select this check box to not show identification information when you make VoIP
phone calls. Clear the check box to show identification information when you make
VoIP phone calls.
Phone 1 and Phone 2 correspond to the Prestige's physical PHONE 1 and 2 ports,
respectively. Select whether you want to receive calls for this SIP account on Phone
1, Phone 2 or both. If you select both, you will not know which SIP account a call is
coming in on.
Click Settings to open a screen where you can configure the Prestige's advanced
VoIP settings like SIP server settings, the RTP port range and the coding type.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
Server Port field again here.
Chapter 7 VoIP Screens