System Time And Date - ZyXEL Communications ZyXEL NBG-415N User Manual

Table 42 Tools: Admin (continued)
LABEL
Enable Remote
Management
Remote Admin
Port
Remote Admin
Inbound Filter
UPNP
Enable UPNP
Web Configurator
Language
Enable Auto
Detection

8.2 System Time and Date

To change your ZyXEL Device's time and date, click Tools > Time. Use this screen to
configure the ZyXEL Device's system time based on your local time zone.
Chapter 8 Tools
DESCRIPTION
Remote management allows you to allow access to the ZyXEL Device web
configurator from the WAN.
Select this option to activate this feature and set the fields that display below.
Clear this check box to disable this feature.
Enter the port number to access the ZyXEL Device for device management over
the WAN.
For example, if you enter 8080 in this field and the WAN IP address of the ZyXEL
Device is 172.23.37.205, then you must enter http://172.23.37.205:8080 to access
the web configurator on the ZyXEL Device.
Select an inbound filter from the drop-down list box to restrict remote management
access to your ZyXEL Device over the WAN. You can select the default filters to
allow or deny all access.
You can configure a customer inbound filter in the Inbound Filter screen (click
Advanced > Inbound Filter). Refer to
information.
Select this option to activate this feature.
The web configurator on the ZyXEL Device is multilingual.
Select this option to set the web configurator to automatically detect and display
the interface in your language.
ZyXEL NBG-415N User's Guide
Section 7.10 on page 96 for more
104