Positioning The Fork Protection; Removing The Fork Legs; Installing The Fork Legs - KTM 450 SX-F EU Repair Manual

Ol/FORK, TRIPLE CLAMP
Installinllhl fork I~
- Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
13
I
Remaining screws, chassis 110
Nm (7.4 Ibf ft)
I
- Position brake line. Put the clamp on, mount and tighten screws
- Position the fork protection on the right fork leg. Mount and tighten screws.
Guideline
I
Remaining screws, chassis
110
Nm (7.4 Ibf ft)
I
Preliminary work
- Raise the motorcycle with the lift stand. (or p.
9)
- Remove front wheel. (or p.
83)
Main work
- Remove screws and take off clamp.
- Remove screws and take off brake caliper.
- Hang the brake caliper and the brake line loosely to the side.
- Loosen screw . Remove the fork leg on the left.
- Loosen screw . Remove the fork leg on the right.
Main work
- Position the fork legs.
• Info
I
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws toward the fron!.
- Tighten screws
Guideline
Screw, top triple clamp
- Tighten screws
Guideline
I
Screw, bottom triple clamp
M8 17
Nm
(12.5 Ibf ft)
112
Nm (8.9 Ibf ft)
I