Removing The Oil Pressure Regulator Valve; Checking Spring Length Of Oil Pressure Regulator Valve; Installing The Oil Pressure Regulator Valve - KTM 450 SX-F EU Repair Manual

301ENGINE - WORK ON THE INDIVIDUAL PARTS
Guideline
Screw, stator cable holder M5 6 Nm
(4.4 Ibf
ft)
- Remove screw plug with sealing washer
- Remove pressure spring and ball .
Chackinllprinllan~
of
oil rassura ralulator valva
20015S-10
e
d ,.(
c{
W 30159S-11
Preliminary work
- Remove the oil pressure regulator valve.
(or
p. 137)
Main work
- Measure the spring length of the oil pressure regulator valve.
Oil pressure regulator valve
Minimum length of pressure spring 38.5 mm (1.516 in)
>
If the measured value does not meet specifications:
- Change the spring.
Subsequent work
- Install the oil pressure regulator valve. (or p. 137)
- Install ball
and pressure spring .
- Mount and tighten screw plug with sealing washer
Guideline
Oil pressure regulator valve plug M14x1.5
Loctile- 243""
18 Nm
(13.3 Ibf
It)
137