Removing The Fork Protector; Installing The Fork Protector; Conducting Major Fork Service - KTM 450 SX-F EU Repair Manual

Ol/FORK, TRIPLE CLAMP
R.movinl tIIa fork rotector
800306-10
Installinl the fork protector
800306-10
Conductinl major fortls.lviea
• Info
- Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 Ibf ft)
- Position the brake line and clamp. Mount and tighten screws
Subsequent work
- Install the front wheel. (-- p. 83)
Preliminary work
- Raise the motorcycle with the lift stand. (-- p. 9)
- Remove front wheel. (-- p. 83)
- Remove the fork legs. (-- p. 13)
Main work
Loctile- 243'"
- Remove screws on the left fork leg. Remove the fork protector upwards.
- Remove the screws on the right fork leg. Remove the fork protector upwards.
Main work
- Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
14
J
I
Remaining screws, chassis
110 Nm (7.4 Ibf
It)
I
- Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
I
Remaining screws, chassis
110 Nm (7.4 Ibf
It)
I
Subsequent work
- Install the fork legs. (-- p. 13)
- Install the front wheel. (-- p. 83)
I
The steps are identical for both fork legs.
Condition
The fork legs are disassembled.