Agilent Technologies 280-DS Operator's Manual page 71

4 Operating the 280-DS
Vessel Temperature Probe Placement
1 If the dissolution apparatus has vessel temperature probes, lower them into
NOTE
Figure 49.
2 Click Run to continue to the next screen and start the test.
280-DS Operator's Manual
position. You will be prompted to wait until the temperature of the water in the
vessel reaches the target value. If the dissolution apparatus is online, the
temperature will be detected automatically.
Since heating is a lengthy process, it is recommended to preheat
the water bath before using the 280-DS.
Vessel Temperature Probe Placement
71