Agilent Technologies 280-DS Operator's Manual page 57

4 Operating the 280-DS
Paddle or Basket Height
1 To measure the height, push the height lever to move the height arm
2 Hold for a few seconds until the Accept button is available for selection and
Figure 35.
3 Click Accept to store the value and continue to the next screen.
NOTE
280-DS Operator's Manual
extension to the bottom of the paddle or basket.
release it. The maximum reading is recorded as basket/paddle height.
Paddle or Basket Height
If a basket or paddle is not at the desired position, you can adjust
and re-measure it by clicking Reset to repeat the test. Ensure that
the Vessel Module height arm extension is touching the
bottom-center of the vessel.
57