Agilent Technologies 280-DS Operator's Manual page 80

4 Operating the 280-DS
Vibration Tab
When you select the Vibration tab, the vibration data stream from 280-DS
Instrument Module starts and other measurement data streams from Vessel
Module and Instrument Module stop. This allows you to stop and restart the
vibration data in order to take a snapshot of the data.
Figure 58.
The vibration data can be recorded and replayed. When you click
the output file, the accelerometer data is saved as the tab-delimited, three
column spreadsheet. Each column represents acceleration on the X-, Y-, and
Z-axis. To stop the recording, click
NOTE
80
Vibration Tab
You can record up to 60 seconds of the data stream.
and to see the recorded data, click
280-DS Operator's Manual
and select
.