Agilent Technologies 280-DS Operator's Manual page 69

4 Operating the 280-DS
Temperature Probe Placement
1 If the dissolution apparatus has a water bath and a probe to monitor its
NOTE
Figure 47.
2 Click Run to continue to the next screen and run the test.
280-DS Operator's Manual
temperature, you will be prompted to set the temperature to the target value.
If the dissolution apparatus is in the Online Mode, the temperature will be set
automatically.
Heating the water bath can be a lengthy process so it is
recommended to preheat the bath prior to beginning the
measurement sequence.
Temperature Probe Placement
69