Agilent Technologies 280-DS Operator's Manual page 45

4 Operating the 280-DS
Selecting the Stirring Element
1 Select the applicable stirring element for the test and check the boxes next to
2 Click Next to continue.
Figure 23.
NOTE
280-DS Operator's Manual
the positions you want to test.
Stirring Element and Vessel Positions
If any of the Active Positions are unchecked, the software will
notify you that the dissolution apparatus qualification record will
not be updated since no positions are being tested.
For any test procedure executed with less than the complete set of
active vessels, FOR REFERENCE ONLY will appear on the final test
report.
45