Table of Contents
Advertisement
Chapter 2: Installing the Access Point
Attaching the
Access Point to
the Base Plate
26
Draft 11-11-2016
Figure 8. Attaching the Mounting-Bracket Screw
To attach the access point and mounting bracket to the base plate on the
wall or ceiling, perform the following:
1. Have someone hold the bottom of the access point next to the base
plate attached to the wall or ceiling.
2. Insert the two base-plate pins into the circles of the keyhole slots, as
shown in Figure 9.
Step 2
Figure 9. Attaching Access Point to Base Plate
3. Slide the access point downward to lock the necks of the base-plate
pins in the slots, as shown in Figure 9.
Step 4
Step 3
Step 3
Advertisement
Table of Contents
