Table of Contents
Advertisement
Page 28 - Installation
Removing a Subscription
Subscribing Non-INDeX Handsets
Page 28
Removing a Subscription
If necessary, you can remove a subscription from the handset. Do not do
this lightly as you may not be able to re-subscribe without assistance
from your System Maintainer.
1. Press MENU and then > until LOGIN appears, then press
2. SELECT LOGIN appears.
3. Press > until required SUBSCRIPTION REMOVE appears,
then press
.
4. Enter your password and press
5. SUBSCRIPTION REMOVE appears, press
system you wish to remove appears
6. Press
again to remove the system.
7. If the system removed was the one currently in use, you need to LOGIN
to another system (see page 27).
8. Press MENU to finish.
GAP compatible DECT handsets can be subscribed to the DECT system.
To do this you will require the original handset manufacturers instructions
for subscribing that handset.
A difficulty may arise in determining the serial number of the handset so
that it can registered on the DECT systems prior to subscription.
To determine a handsets serial number
1. Set the DECT system to allow subscription
(see Subscribing Handsets on page 26).
2. Go to the CCFP programs Status page and set the Status Level to
Level 2 (see MSF Status on page 34).
3. From the non-DECT handset attempt to subscribe to the DECT
system using the handset manufacturer's instructions. The
subscription will fail as the handset is not registered in the DECT
database but during the attempt its serial number will be displayed in
the Receive Status display.
4. Note the serial number and add the handset to the registered
handsets (see Registering Handsets on page 25). You should now be
able to subscribe the handset.
.
and then press > until the
DECT - Installation Manual
38HBKD0001SAH – Issue 14 (27th October 2003)
.
Advertisement
Table of Contents
