Sio Commands - Avaya DECT Installation Manual

SIO Commands

F1 - HELP
F2 - DIAL
F3 - HANGUP
F4 - MSFSETUP
F5 - MFSINFO
F6 - MSFREL
F8 - PASSWORD
F9 - SYSTINFO
F10 - QUIT
Shift F1 - BACKUP
Shift F2 - RESTORE
Shift F3 - USRREAD
Shift F4 - USRREADAL
Shift F5 - USRCONFIG
Shift F6 - USSREM
DECT - Installation Manual
38HBKD0001SAH – Issue 14 (27th October 2003)
Pressing F1 starts the help function. Once started, pressing any other key
combination will display help for that function. To end the help display
press Enter. Press a down arrow cursor key to page down in the help
display.
Used to dial a number when using SIO with a modem connection.
Used to hangup an SIO modem connection.
Allows real time messages to be sent to 20DT handsets. The command
prompts for the details to be entered, press TAB to move between
options, press Enter to implement.
The same as F4- MSFSETUP but without options for setting the call type.
End any MSF messages that has not been answered for a specific
handset number.
Not currently supported.
Show the PCS Version and details of the DECT Control Unit.
Exit the SIO program.
Downloads the DECT Database to the PC. The command will prompt for a
file name (maximum 8 letters ). When complete, the Status Field displays
"system back-up complete".
Loads a database file onto the DECT. The command will prompt for a
filename in the same directory as the SIO program.
Shows details of the settings of a DAB card channel. When entered, the
command prompts for the IWU (DAB Card) and Channel number, use
TAB to toggle between fields, press Enter to display details.
Displays the settings of all the channels on a DAB Card including name
and standby text. The command prompts for an IWU (DAB Card) to be
entered.
Allows real time programming of any channel after prompting for the IWU
(DAB card) and channel number. Use TAB to move between options and
make changes, press Enter to implement.
Use this option with caution. Allows removal of any handset against the
DAB card and channel selected.
Using SIO - Page 65
Page 65
SIO Commands