4-2 Playback
4-1 Preparing for Playback
4-2-2 Variable-Speed Playback in Jog/Shuttle/Variable Modes
Jog mode playback
4-4
Chapter 4 Playback
In the Jog/Shuttle/Variable modes, you can vary the playback speed as
follows:
Jog mode: Between –3 and +3 or between –1 and +1 (selectable in the
set-up menu) times normal speed, as determined by the rotational
speed of the search dial.
Shuttle mode: Between –50 and +50 times normal speed, as determined
by the angle of rotation of the search dial.
Variable mode: Between –1 and +3 times normal playback speed, as
determined by the angle of rotation of the search dial.
Follow the procedure below to play back in jog mode.
1
Press the search dial or the JOG button so that the JOG indicator lights.
Each time you press the dial, the VTR toggles between jog mode and
shuttle mode. The JOG or SHUTTLE indicator lights to indicate the
selected mode.
The p indicator lights and the VTR enters still-picture mode.
2
Rotate the search dial in the direction of playback.
The playback speed corresponds to the rotational speed of the search
dial. One of the direction indicators (Z or z) lights to show the
direction of playback.
3
To stop jog mode playback, stop rotating the search dial (the p
indicator lights), or press the STOP button for stop mode.
1
1,2
Jog mode playback