Table of Contents
Advertisement
3-1 Connecting External Equipment
5
To change a customize menu data, rotate the search dial while holding
down the JOG button.
Each item is displayed individually while holding down the JOG
button.
Data number
Data
0
on
0 (on): The item is displayed in the set-up menu mode.
1
1 (off): The item is not displayed in the set-up menu
off
6
Repeat Steps 3 through 5 to change other item data.
To cancel the setting and return to the original settings, press the
MENU button.
7
To save your changes, press the SET button.
Note
The changes that you made are not saved unless you press the SET button.
To return to the factory setting values
Press the RESET button.
COSTOM-1 ITEM-005
DISPLAY INFORMATION
SELECT
off
Monitor display
Description
mode.
Chapter 3 Setting Up the VTR
3-13
Advertisement
Table of Contents
