Playback Procedures; Normal Playback; Playback In Jog Mode - Sony Betacam SX DNW-A22 Operation Manual

Digital videocassette player
Hide thumbs Also See for Betacam SX DNW-A22:
Table of Contents

Advertisement

4-2 Playback Procedures

This section describes the following types of playback
which the unit can carry out:

• Normal playback

Playback at normal (×1) speed

• Playback in jog mode

Variable speed playback, with the speed determined
by the speed of turning the search dial
• Playback in shuttle mode
Variable speed playback, with the speed determined
by the angular position of the search dial
• Playback using the capstan override function
The playback speed is adjusted temporarily according
to the angular position of the search dial, to align the
playback phase with that of another VTR.
4-2-1 Normal Playback
Insert a required cassette beforehand.
For details of how to insert a cassette, see Section 3-3-2,
"Inserting and Ejecting Cassettes" (page 3-4).
To start playback
Press the PLAY button.
Playback starts, the servo locks, and the SERVO
indicator lights.
To stop playback
Press the STOP button.
Cassette compartment
PLAY button
4-2
Chapter 4 Playback
STOP button
If you play back to the end of the tape
The tape is automatically rewound, and stops.
When using the Dolby noise reduction system
When using an analog Betacam cassette, you can use
Dolby C noise reduction for audio playback.
To activate the Dolby noise reduction system, set the
DOLBY NR switch on the subsidiary control panel to
ON.
4-2-2 Playback in Jog Mode
In jog mode, you can control the speed of playback by
the speed of turning the search dial. The playback
speed range is ±1 times normal speed.
To carry out playback in jog mode, use the following
procedure.
1
Press the JOG button or search dial so that the JOG
button is lit.
Pressing the search dial toggles between jog mode
and shuttle mode.
2
Turn the search dial in the desired direction, at the
speed corresponding to the desired playback speed.
Playback in jog mode starts.
3
To stop playback in jog mode, stop turning the
search dial.
The search dial function to toggle between jog
mode and shuttle mode every time being pressed
can be prohibited by changing the setting of
extended menu item 101.
1 1,2,3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Betacam sx dnw-a22p

Table of Contents