Table of Contents
Advertisement
3-1 Connecting External Equipment
Item number
011
CHARACTER
V-SIZE
CONDITION
012
DISPLAY ON
VIDEO
MONITOR
101
SELECTION
FOR SEARCH
DIAL ENABLE
116
JOG DIAL
RESPONSE
Items that require setting for operations (continued)
Item
Settable range
[01]
02
03
04
[0]
1
[0]
1
[0]
1
2
Function
Determines the vertical size of superimposed characters.
01: Standard size.
02: Two times standard size.
03: Three times standard size.
04: Four times standard size.
Determines whether or not to include the display of the channel
condition with the superimposed characters.
0: Does not display the condition.
1: Displays the condition.
How the channel condition is displayed
The condition is displayed below the timer or status line of the
characters. (The entire area for displaying the condition is blank
when an analog tape is inserted.)
Example: V– – – – A– – – –
The four characters following "V" indicate each video channel
condition between Ach and Dch of the rotary head.
The four characters following "A" indicate each audio channel
condition between Ach and Dch of the rotary head.
Character pattern
(Space): Status in which no condition is indicated on the front
panel. (STBY OFF, etc.)
– : The condition is good. (The green indicator lights up.)
* : The condition is less than good. (The yellow indicator lights up.)
p : The condition is bad. (The red indicator lights up.)
Determines how the unit enters search mode.
0: The unit enters search mode when you rotate the search dial in
all modes.
1: The unit enters search mode when you press the SHUTTLE,
JOG or VAR button.
Determines the tape speed (VTR command) characteristics which
correspond to the JOG dial rotation.
0: Tape speed changes linearly in a range of –1 to +1 times
normal tape speed.
1: Tape speed changes in steps in a range of –3 to +3 times
normal tape speed as shown below in TYPE 2. (Tape speed
does not change when the JOG dial is in a range of ±1 times
normal tape speed.)
2: Tape speed changes linearly in a range of –3 to +3 times
normal tape speed as shown below in TYPE 3.
TYPE2
SPEED
FWD
+3
+1
RVS
-1
ROTATION
-3
RVS
TYPE3
SPEED
FWD
+3
FWD
RVS
FWD
ROTATION
-3
RVS
Chapter 3 Setting Up the VTR
3-3
Advertisement
Table of Contents
