Table of Contents
Advertisement
3-3 Superimposed Characters
3-1 Connecting External Equipment
Adjusting the character display
Information displayed
3-14
Chapter 3 Setting Up the VTR
If you set the CHARACTER switch on the system set-up panel to ON,
messages indicating the time codes and operation modes are superimposed
on the signals output from the COMPOSITE VIDEO OUTPUT 2
(SUPER) or RF ADAPTOR connector.
You can use the set-up menu to set the position, size and type of the
superimposed characters.
For details, refer to "3-2 Set-Up Menu" on page 3-2.
T C R .
2 3
:
5 9
S H U T T L E
1 Types of time data
Display
CTL
CTL counter data
TCR
LTC reader time code
UBR
LTC reader user's bits
TCR.
VITC reader time code
UBR.
VITC reader user's bits
Note
When the time data or user's bits is not read correctly, it is displayed with
an asterisk. For example, "T*R", "U*R", "T*R." or "U*R.".
1 Type of time data
Time data
2 Drop-frame mode of the time
code reader (for DVW-522
only)
3 Drop-frame mode of the CTL
counter (for DVW-522 only)
4 VITC field
:
4 0
:
1 8 *
S T I
L L
5 Operation mode
Displayed information
Types of time data
Meaning
Advertisement
Table of Contents
