2-3 Connector Panel
2-1 Control Panel
3 BREAKER button
1 COMPOSITE VIDEO OUTPUT connectors
(BNC type)
Output analog composite video signals. When the
CHARACTER switch is set to ON, the signal output
from connector 2 (SUPER) contains superimposed
characters, such as time data or menu setting data.
2 RF ADAPTOR connectors
By connecting these connectors to an RFU-89UCKA/
EKA /ASKA RFU adaptor kit or equivalent equipment,
then supplying the resultant RF signal to the antenna
terminals of a regular TV set, you can check the video
and audio contents of a recorded tape on a regular TV
set.
5 CONTROL PANEL connector
4 AC IN connector
Connector panel
1 COMPOSITE VIDEO OUTPUT connectors
2 RF ADAPTOR connectors
7 RS232C connector
6 MONITOR OUTPUT connectors
3 BREAKER button
Disconnects the primary circuit of the AC power
transformer when an excessive current surge is
detected.
4 AC IN connector
Connect to an AC outlet using the power cord supplied
with the VTR.
Chapter 2 Locations and Functions of Parts and Controls
2-9