Table of Contents
Advertisement
3-2 Set-Up Menu
3-1 Connecting External Equipment
3-10
Chapter 3 Setting Up the VTR
5
To change the setting, rotate the search dial while holding down the
SHUTTLE or JOG button. When you have reached the required value,
release the button.
Item number
6
Repeat Steps 3 through 5 to change other items.
To cancel the setting and return to the original settings, press the
MENU button.
7
To save your changes, press the SET button.
Setting sub-items
1
Select item 713 in Step 3 on page 3-9.
The sub-item number is displayed in the seconds display, and the
current setting is displayed in the frame display in the time counter.
2
Rotate the search dial while holding down the STOP button to select
the sub-item to be set.
3
Rotate the search dial while holding down the SHUTTLE or JOG
button to change the setting.
The selected sub-item is highlighted.
Value flashes.
Time counter display
SETUP-1 ITEM-005
DISPLAY INFORMATION
SELECT
time data & status
Monitor display
Advertisement
Table of Contents
