Part 6: Maintenance; Part 7: Technical Data - involight MH FXWASH1912 User Manual

Part 6: Maintenance.

Cleaning and maintenance:
It is essential that you clean the projector at regular intervals. Disconnect the device from the mains before
maintenance work!
The objective lens should be cleaned on a weekly basis, since fog fluid residues settle very quickly, which
considerably reduce the luminosity of the device.
Clean the fan monthly.
The dichroic color filters, the gobo wheel and the inner lenses should be cleaned on a monthly basis.
In order for the bearings of the rotating parts to work well, they must be lubricated approximately every 6 months. For
oiling use a syringe with a fine needle. The amount of oil must not be excessive to prevent the oil from leaking while
rotating.
Maintenance and service work is reserved exclusively for authorized specialist personnel!

Part 7: Technical Data.

MODEL NAME:
Product type:
Type:
LED Number:
LED Type:
Beam angle:
Color specter:
Light input:
DMX input:
DMX output:
DMX Mode:
PAN movements:
TILT movements:
Strobe frequency:
Standalone Mode:
Operations:
Display:
Power supply connection:
Housing:
Colors:
Cooling:
Voltage:
Operating voltage:
Power consumption:
Weight:
Additional features:
MH FXWASH1912
LED Moving Head
Wash
19
12W RGBW 4in1
4°-60°
RGBW
55500Lux – 12500Lux/ @ 1 m
3-pin XLR male
3-pin XLR female
21, 23, 35, 78, 92, 97 or 99 channels
540°+16 bit fine
270°+16 bit fine
> 25 Hz
DMX, Auto Run, Sound Control
„Mode", „Up", „Down", „Enter"
LCD Display
Powercon compatible input and output
Metal, ABS
Black
Fan
450W
AC90-240V, 50/60Hz
415x275x425mm
15kg
rotated Front lens
34