Part 6: Maintenance - involight LEDBARFX103 User Manual

12
13
14
15
16
17
18
...
19
188
189
190
Part 5: Troubleshooting:
The device does not work, no light:
Check the mains connection and the main fuse.
No reaction to the DMX controller:
Check the DMX connections and cables for correct connection. Check the address settings and the DMX polarity.
Check whether the DMX cables are near or next to high-voltage cables. Try another DMX controller.
NOTE!
Possible disruptions in data transmission.
To ensure trouble-free operation, use special DMX
Cables and not normal microphone cables.

Part 6: Maintenance:

IMPORTANT NOTE:
maintenance work!
The screws used must be tightened firmly and must not show any traces of rust. The housing, the mounting
bracket and the installation location (e.g. ceiling or traverse) must not be adjusted, i.e. do not drill additional holes
in mounting brackets, do not change the connections, etc.
Regularly clean the externally accessible optical lenses to optimize the light output. The frequency of cleaning
depends on the operating environment: damp, smoky or particularly dirty environments can cause a greater
accumulation of dirt on the optics of the device.
Use a lint-free, damp cloth for cleaning. Under no circumstances use alcohol or any solvents for cleaning!
Apart from the fuse, there are no serviceable parts inside the device.
Fuse change.
IMPORTANT NOTE: Replace the fuse only with a fuse of the same type and with the same values (printed on the
device). If the fuse blows repeatedly, please contact an authorized service center.
1: Pull the mains plug out of the mains socket and disconnect the power cord from the mains connection on the
device.
2: Open the fuse holder on the back of the device with a suitable screwdriver.
Intensity green - background LED1, value between "000" and "255"
0-255
Intensity blue - background LED1, value between "000" and "255"
0-255
Intensity red - background LED 2, value between "000" and "255"
0-255
Intensity green - background LED 2, value between "000" and "255"
0-255
Intensity blue - background LED 2, value between "000" and "255"
0-255
Intensity red - background LED 3, value between "000" and "255"
0-255
Intensity green - background LED 3, value between "000" and "255"
0-255
Intensity blue - background LED 3, value between "000" and "255"
0-255
...
Intensity red - background LED 60, value between "000" and "255"
0-255
Intensity green - background LED 60, value between "000" and "255"
0-255
Intensity blue - background LED 60, value between "000" and "255"
0-255
Disconnect the device from the mains before performing
...
23