Part 4. Troubleshooting; Part 5: Maintenance; Part 6: Technical Data - involight COBPAR100W User Manual

Part 4. Troubleshooting:

The device is not working, no light:
Check the mains connection and the main fuse.
No reaction to the DMX controller:
Check the DMX connections and cables for correct connection. Check the address settings and DMX polarity.
Check whether the DMX cables are near or next to high-voltage cables. Try another DMX controller.
If the information given here does not lead to success, please contact our Service Center.
Possible disruptions in data transmission
NOTE!
To ensure trouble-free operation, use special DMX cables and not normal microphone cables. Never connect
the DMX output to audio devices such as mixers or amplifiers.

Part 5: Maintenance:

WICHTIGER HINWEIS:
IMPORTANT NOTICE: Disconnect the device from the mains before performing maintenance work!
The screws used must be tightened firmly and must not show any traces of rust. The housing, the mounting
bracket and the installation location (e.g. ceiling or traverse) must not be adjusted, i.e. do not drill additional holes
in mounting brackets, do not change the connections, etc. Regularly clean the externally accessible optical lenses
to optimize the light output. The frequency of cleaning depends on the operating environment: damp, smoky or
particularly dirty environments can cause a greater accumulation of dirt on the optics of the device. Use a lint-free,
damp cloth for cleaning. Under no circumstances use alcohol or any solvents for cleaning! Apart from the fuse,
there are no serviceable parts inside the device.

Part 6: Technical data:

MODEL NAME:
Product Type:
Color range:
LED number:
LED type:
Beam angle:
DMX input:
DMX output:
DMX mode:
DMX functions:
Standalone functions:
Controls:
Display elements:
Operating voltage:
Power consumption:
Power supply connection:
Housing material:
Housing color:
:
Dimensions
Weight:
Other features:
DMX input:
Trennen Sie das Gerät vor Wartungsarbeiten vom Netz!
COBPAR100W
LED COB PAR Spotlight
Warm white
1
100W
100 °
3-pin XLR male
3-pin XLR female
3 channels
Master dimmer, strobe
Master / slave operation
Mode, setup, up, down
4-digit LED display
AC100-240V, 50/60 Hz
120W
4640Lux @ 1m
Power connector input and output
ABS Plastic
black
370 x 250 x 250mm
2.7 kg
multifunctional mounting bracket
17