Kioti NX4510 Manual page 255

Hide thumbs Also See for NX4510:
Table of Contents

Advertisement

caUSE
5. Hydraulic sys-
Oil is leaked from pipe or hose
tem is faulty
3-point hitch cannot be lowered
3-point hitch cannot be lifted
3-point hitch ROPS itself
6. Electric system
Headlamps cannot be turned on
is faulty
or are dim.
TE120(NX4510,5010,5510)CABIN,ROP5 5
cOUNTERMEaSURES
The pipe clamp is loose. Re-tighten it.
The pipe is cracked. Have it repaired in a workshop.
Set the lowering speed control lever to the lowering position if it is set
to the stop position.
The valve and cylinder are damaged.
Have them repaired in a workshop.
The transmission fluid is insufficient. Add it to the specified level.
There is air in the intake pipe. Bleed the pipe.
The oil filter is clogged. Clean or replace it.
The hydraulic filter, valve and cylinder are malfunctioning.
Have them repaired in a workshop.
Set the draft control lever to the "Deep" position.
Select the highest top link hole.
The fuse is blown. Check the wiring and replace the fuse.
The bulb is blown. Replace it.
The ground and terminal wirings are poorly contacted.
Check and clean them.
The battery electrolyte level is low. Charge the battery.
9
9
TROUBLESHOOTING
TROUBLESHOOTING


-
-
9
2013-11-05 오후 4:31:47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx5010Nx5510Nx6010

Table of Contents