Jump Starting; Jump Starting - Kioti NX4510 Manual

WARNING
Warming.up.the.engine.exces-

sively.increases.fuel.consump-
tion. and. affects. the. durability.
of.the.tractor.negatively.
Never.warm.up.the.engine.and.

leave.the.tractor.for.an.extend-
ed.period.of.time..It.can.cause.
fire and an accident.
TE120(NX4510,5010,5510)CABIN,ROP11 11
JUmP.STARTING
(1) dead Battery (2) Jumper cables
(3) Helper Battery
If the battery is discharged and the
engine cannot be started, it is possi-
ble to start the engine by connecting
the discharged battery to a battery
from another tractor or other extra
battery.
1. check that the voltage of the dis-
charged battery is same as the volt-
age of the other tractor or vehicle
for jump start. (Specification for this
tractor: 12 v)
2. check the length of the jump cable
and position another tractor near
the tractor with the discharged bat-
tery. Then, put all the shift levers in
the neutral position, apply the park-
TE1O519A
ing brake, and stop the engine.
3. Wear protective glasses and gloves
and open the hoods of both trac-
tors. Remove the battery terminal
cover as necessary.
4. connect the alligator clips on both
ends of the red positive cable to the
positive terminals of both batteries.
5. connect one clip of the black nega-
tive cable to the negative terminal
of the normal battery and the other
clip to the tractor body with the
discharged battery. make sure to
connect the clip to the body part
without paint.
5
opERATIoN 11
-
5
2013-11-05 오후 4:11:44