RePlaceMent
(1) wiper arm
(3) wiper Blade
(2) wiper fixing lever
1. set the wiper upright to replace the
wiper blade.
2. hold the blade with one hand and
press the blade fixing lever with
the other hand to separate the
blade from the fixing part.
TE120(NX4510,5010,5510)CABIN,ROP41 41
H11O649A
(1) wiper Blade
3. lower the blade and pull out the
blade by moving it in the shape of
"U". (Arrow direction in the figure)
H11O650A
(1) wiper arm
(2) fixing lever
4. set a new wiper blade horizontal
so that the fixing lever is facing
down. align the wiper arm with
the fixing lever slot and lower the
blade.
caUtiOn
•
When the wiper blade is sepa-
rated, the wiper arm should
not contact with the wind-
shield or rear glass. the glass
can be damaged.
7
7
maintenance
maintenance
1
1
-
-
H11O651A
7
2016-04-25 오후 5:50:06