Kioti NX4510 Manual page 253

caUSE
1. When engine Start motor does not rotate

is difficult to when key switch is turned
start
2. When output is Valve out of adjustment

insufficient
Air cleaner is dirty

Fuel injection pressure is wrong

3. When color of Fuel is of extremely poor quality

exhaust is spe-
cially bad
Nozzle is bad

If you do not find the cause of trouble, consult your dealer for assistance.
※
TE120(NX4510,5010,5510)CABIN,ROP3 3
cOUNTERMEaSURES
Depress the clutch pedal unless depressed. (Manual type)

Put the PTO switch to the OFF position.

If the switch or start motor is faulty, have it repaired in a workshop.

If any terminal is loose or corroded, clean or fix it firmly.

Adjust to proper valve clearance.

Contact to KIOTI dealer.

Clean or replace the element at every 100 to 200 hours of operation.

Adjust it to 150 to 160 kgf/cm2 or replace the injection nozzle.

Select good quality fuel.

Temperature
- Above -10°C (14°F)
- Below -10°C (14°F)
If necessary, replace with new nozzle.

TROUBLESHOOTING TROUBLESHOOTING
Fuel type
NO.2 Diesel
NO.1 Diesel
9 9
 
- -
9
2013-11-05 오후 4:31:47