Kioti NX4510 Manual page 24

1 1
1 1 nX4510/nX5010/nX5510/nX6010 nX4510/nX5010/nX5510/nX6010
- -
3. before installing or using p.t.o
driven equipment, read the man-
ufacturer's manual and review the
safety labels attached to the equip-
ment.
warning
•
before driving an implement
through the Pto, always make
sure that all bystanders are
well away from the tractor.
•
when using the Pto drive with
a stationary tractor, always
make sure that the gears are
in neutral and that the parking
brake is applied.
•
before starting up any Pto-
driven implement hitched to
the three-point linkage, lift the
implement to its full height
and check that at least 1/4 of
the total length of the tele-
scopic section of the drive
shaft is engaged.
TE120(NX4510,5010,5510)CABIN,ROP12 12
warning
•
ensure that implements and
attachments are properly in-
stalled and that the tractor and
implement Pto rPm ratings
match.
4. When operating stationary p.t.o
driven equipment, always apply
the tractor parking brake and place
chocks behind and in front of the
rear wheels. stay clear of all rotat-
ing parts.
5. do not attach a pto dirven imple-
ment if the implements safety
shields are damaged or not in
place. rotating shafts are an en-
tanglement hazard.
T66O122a
2014-03-27 오전 10:27:35