Instructions For Use - Otto Bock 4R103 Instructions For Use Manual

► In case of changes in or loss of functionality, do not continue using the
product (see "Signs of changes in or loss of functionality during use" in
this section).
► Take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
► Inform the patient.
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an altered
gait pattern, a change in the positioning of the prosthetic components relat­
ive to each other and by the development of noises.
4 Scope of Delivery
The following single components and accessories are included in the scope
of delivery in the specified quantities and are available for reordering accord­
ing to their respective symbols as single components ( ), single compon­
ents with minimum order quantities ( ) or single-component packs ( ):
Fig. Item
– –
– –
– –
– –
– –
5 Preparation for Use
CAUTION
Incorrect alignment or assembly
Injuries due to fall resulting from damaged prosthesis components
► Observe the alignment and assembly instructions.
CAUTION
Incorrect mounting of the tube
Fall due to breakage of load-bearing components
► Slide the tube all the way to the stop in the intended prosthetic com­
ponent when mounting.
12 | Ottobock
4R103 sliding tube clamp adapter
Quantity Designation
1 ( )

Instructions for use

1 ( ) Cap screw
2 ( ) Cap screw
4 ( ) Set screw
1 ( ) Set screw
Reference num­
ber
647H66
501Z2=M4x22
501Z16
506G3=M8x16
506G3=M5x8