Assigning Videoterminal To A Home Station - Gira 2600 Series Installation And Operating Instructions Manual

Assigning VideoTerminal to a home station

The so-called internal call function can be realised with the VideoTerminal. A voice
connection between the VideoTerminal and the home station can be established via
the internal call.
Please proceed as follows to assign the VideoTerminal to another home station:
Menu
A s s i g n
P r o v i d e
i n t e r n a l c a l l
I n t e r n a l c a l l 1
1. Press the "System prog." button on the control device
for 3 sec. to start programming mode.
2. Press the "Menu" button on the VideoTerminal to open
the Commissioning menu.
3. Select the menu item "Assign" in the Commissioning
menu of the VideoTerminals.
4. Select the menu item "Provide internal call" in the
"Assign" menu.
5. Select the desired internal call (1-14) in the "Provide
internal call" menu and confirm.
✓ The VideoTerminal outputs a long acknowledgement
tone.
6. Press the button on the home station for 3 seconds
until a brief acknowledgement tone is heard.
✓ A long acknowledgement tone indicates successful
assignment.
Three short acknowledgement tones indicate faulty
assignment. The memory of the home station may
already be occupied. A maximum of 10 call buttons can
be assigned to a home station (a maximum of 15 call
buttons to a surface-mounted hand-free feature home
station).
7. Briefly press the "System progr." button on the control
device to exit the programming mode.
27