Deactivating/Activating Ringing Tone; Switching On Camera Image - Gira 2600 Series Installation And Operating Instructions Manual

Videoterminal
Table of Contents

Advertisement

Deactivating/activating ringing tone

Only deactivate the ringing tone if necessary
Only deactivate the ringing tone in special cases. Otherwise, your run the risk of
not hearing the ringing in an emergency, for example.
i
Switching off ringing tone in "Automatic door opener" menu
As an alternative, the ringing tone of the VideoTerminal can also be switched off
in the "Automatic door opener" menu (see Page 14).

Switching on camera image

The display of the VideoTerminal and the related colour camera can be specifically
activated/deactivated with the Menu button:
Menu
3 s
Menu
3 s
10
1. Press the
button to deactivate the ringing tone.
✓ The operating button lights up continuously in red if the
ringing tone is deactivated.
2. Press the
button again to reactivate the ringing tone.
✓ The illumination of the operating button goes out.
1. For activation, the Menu button is pressed and held for
approx. 3 seconds.
✓ If several colour cameras are installed, the last active cam-
era is switched on.
✓ The bottom line of the display continuously shows the des-
ignation of the camera currently active.
2. For deactivation, the Menu button is pressed and held
again for approx. 3 seconds.

Advertisement

Table of Contents
loading

Table of Contents