Surface-mounted outdoor station with colour camera and call push button 1-gang, surface-mounted outdoor station with colour camera and call push button 2/3-gang (16 pages)
Page 1
Mounting and operating instructions Surface-mounted hands-free feature home station 1250 ..
Page 3
Device description The surface-mounted hands-free feature home station is a prefabricated unit and is part of the Gira door communication system. 1. Mounting plate 2. Fixing holes for wall mounting 3. 2-gang cover frame without crossbar (frameless installation only possible with wall mounting) 4.
Page 4
Mounting Electrical devices may only be installed and connected by a qualified electrician! You can mount the surface-mounted home station • on a flush-mounted or hollow-wall box (only with cover frame) • directly onto the wall or on a wall lighting connection box (with or without cover frame) Mounting with a cover frame is described in...
Page 5
Connection If you have fastened the mounting plate to the wall, the home station is connected as follows: 1. Connect the 2-wire bus to the BUS terminals and the cables of the floor call button at the ET terminals of the connector if necessary.
Page 6
Commissioning Once you have installed all of the devices (door and home stations, control device etc.), you can start up the door communication system. Commissioning is described in the system manual included with the control device. Max. number of call buttons Note that up to 15 call buttons can be assigned to a surface-mounted home station.
Page 7
Assigning surface-mounted home station video via floor-call button If you cannot access the flat during start-up, you can also assign the surface-mounted home sta- tion video via a connected floor-call button: 1. Control device: press the "Systemprogr." button for 3 s to start the programming mode.
Page 8
Deleting all call button assignments via floor-call button If necessary, the assignments to the surface- mounted home station video can also be deleted via a connected floor-call button: 1. Control device: press the "Systemprogr." button for 3 s to start the programming mode.
Operation Operating buttons The following functions are executed via the four operating buttons of the surface-mounted hands-free feature home station: Accepting a call button flashes for 2 min for an incoming call. Briefly press the button to start intercom communication with the person at the door station.
Page 10
Ending the call To end the voice connection, briefly press the button. The illumination of the button goes out. Setting the speech volume The speech volume is changed to one of four levels during intercom communication. Press the button briefly to increase the speech volume during the call.
Page 11
Setting the call tone volume The call tone volume is changed to one of four levels when no intercom communication is in effect. Press the button for approx. 3 s. There are four volume levels in total. The next- highest volume is set with each button press (3 s).
Page 12
Setting the call tone melody The surface-mounted hands-free feature home station offers five call tone melodies, which can be individually assigned to the floor call button, the call buttons of the door station or the internal call buttons of other home stations.
Page 13
The warranty is provided in accordance with statutory requirements via the specialist trade. Please submit or send faulty devices postage paid together with an error description to your responsible salesperson (specialist trade/ installation company/electrical specialist trade). They will forward the devices to the Gira Service Center.