Table of Contents
Advertisement
Changing display of colour camera
If several colour cameras are installed, it is possible to switch between the respec-
tive camera images with the operating button:
Switching functions
Open door
Switching light on (only in conjunction with a switching actuator)
Switching actions can be triggered on the VideoTerminal in two different ways:
• With the button
• With the "Switching" menu (see Page 14)
1. Turning the operating button selects the respective next
camera. With more than two cameras:
Turning clockwise = next camera,
Turning anticlockwise = previous camera.
✓ The bottom line of the display continuously shows the des-
ignation of the camera currently active.
1. The door opener is operated with the
✓ If several doors are connected, the door opener of the
door station from which the door call was made is oper-
ated within 2 minutes. It switches back to the main door
2 minutes after the start of the call or 30 seconds after
the door call is ended.
:
1. Press the
or staircase illumination).
button to switch the light (e.g. the outdoor
button.
11
Advertisement
Table of Contents
