Opening Door Station Stainless Steel - Gira 2551 20 Installation And Operating Instructions Manual

Opening of Door Station Stainless Steel
90°
Open
90° 90°
Open Open
2.
1.
The included opening tool is required for opening the
Door Station Stainless Steel.
1. Turn the (lower) fastening bolt(s) with the opening
tool to "Open".
Single-column door stations have one lower fasten-
ing bolt, double-column door stations have two
lower fastening bolts.
The position of the fastening bolts is shown via small
recesses on the lower side of the front panel.
Take care with plastered walls
With repeated opening of the door station with
plastered walls, the opening tool may damage the
plaster.
2. Lift the front panel from the lower attachment (1.)
and pull it at an angle downwards from the upper
attachment retainers (2.).
13