Assigning Call Button For Home Station To A Home Station (Internal Call) - Gira 1288 00 Operating Instructions Manual

Assigning call buttons for home station to a home station (internal call)
30
You can implement the so-called internal call function with
the optional call button for home stations. A voice connection
between two home stations can be established via the inter-
nal call.
To assign the call button of a home station to another home
station (e.g. in the hobby room), proceed as follows:
1. Press the "System prog." button on the control device for
3 seconds to start programming mode (see Page 19).
2. Press the call button on home station 1 for 3 seconds
until you hear a short acknowledgement tone.
3 You will hear a long acknowledgement tone.
Releasing the button after 3 seconds
If the button press is not ended after the first acknowledge-
ment tone, all assignments of the respective door/home
station will be deleted after an additional 3 seconds.
3. Press the
until you hear a short acknowledgement tone.
3 A long acknowledgement tone indicates successful
assignment.
Three short acknowledgement tones indicate faulty
assignment. The memory of the home station may already
be occupied. A maximum of 10 call buttons can be
assigned to a home station (a maximum of 15 call buttons
to a surface-mounted hand-free feature home station).
4. Press the "Systemprogr." button on the control device to
exit the programming mode.
5. Carry out a function test.
button on home station 2 for 3 seconds