Table of Contents
Advertisement
Setting ringing tone volume
R i n g i n g t o n e v o l u m e
b a c k
Selecting ringing tone melody
The VideoTerminal offers five ringing tone melodies, which can be individually
assigned to the call buttons of the door station, the internal call buttons of other
home stations or the floor call button. This allows, for example, a different door sta-
tion call button with an individual ringing tone melody to be assigned in a household
with several people (e.g. parents, children). The ringing tone melody is set with the
"Assign ringing tone melody" menu.
i
Triggering ringing tone beforehand
The melody of the last ringing tone triggered is always changed.
A s s i g n m e l o d y
M e l o d y 1
M e l o d y 2
M e l o d y 3
M e l o d y 4
M e l o d y 5
b a c k
i
Note
When deleting the call button assignment to the home station, the corresponding
ringing tone melodies are reset to the factory setting.
16
4 L e v e l
D o o r c a l l
In the "Ringing tone volume" menu the
ringing tone volume of the VideoTerminal
can be adjusted in 8 steps by turning and
pressing the operating button.
When the operating button is turned, the
respectively selected ringing tone volume
sounds.
Pressing the operating button saves the set
value and exits the menu.
If the menu is exited with the Menu button
(back), the change is not saved.
In the "Assign melody" menu the melody of
the last ringing tone triggered can be
selected by turning and pressing the oper-
ating button.
The last ringing tone triggered is displayed
in the top line of the display (here: Door
call).
When the operating button is pressed, the
selected melody sounds and is simultane-
ously saved.
The menu is exited with the Menu button
(back).
Advertisement
Table of Contents
