Table of Contents
Advertisement
Frequency
i
Select camera beforehand
Before the menu item "Frequency" is selected, a colour camera must be selected.
If no camera has been selected, the message "No camera selected" appears.
F r e q u e n c y
b a c k
i
Setting with several VideoTerminals and colour cameras
The frequency setting only applies to the connection from the active VideoTerminal
to the active colour camera. This means that if several VideoTerminals and/or colour
cameras are installed, the frequency for the transmission path from the between
the VideoTerminal and the colour camera must be set individually on each Video-
Terminal.
Resistor
R e s i s t o r
Te r m i n a t i o n y e s
Te r m i n a t i o n n o
b a c k
C a m e r a 1
1 3
o
The optimum frequency of the video signal
of the currently active transfer path is set
for fine-tuning of the video signal between
the camera and the VideoTerminal using
the control button.
If the menu item "Frequency" is ended with
"back", changed settings are not applied.
Factory setting: yes
The terminating resistor of the VideoTermi-
nal is activated/deactivated here.
This setting is dependent on the topology.
More detailed information on this is availa-
ble in the system description included with
the video control device.
19
Advertisement
Table of Contents
