Table of Contents
Advertisement
Lighting
i
Selecting camera beforehand
Before the menu item "Lighting" is selected, a colour camera must be selected. If
no camera has been selected, the message "No camera selected" appears.
L i g h t i n g
a u t o
o f f
b a c k
i
Setting with several VideoTerminals and colour cameras
The setting of the lighting only applies for the active Video Terminal and the active
colour camera in each case.
This means that if several VideoTerminals and/or colour cameras are installed, the
lighting for each colour camera must be set individually on each VideoTerminal.
20
C a m e r a 1
o
Factory setting: auto
The behaviour of the field of view illumina-
tion of the camera is set here. The corre-
sponding colour camera must be selected
before setting.
auto: The field of view illumination of the
colour camera is switched on for a door call
or when the VideoTerminal is switched on
manually if the ambient brightness is less
than 1 lux.
off: The field of view illumination always
remains switched off.
Advertisement
Table of Contents
