Table of Contents
Advertisement
Assign
A s s i g n
A s s i g n c a l l
P r o v i d e i n t e r n a l c a l l
A s s i g n s w i t c h i n g a c t i o n
R : 3 . 1 0
S : 2 . 2 0
b a c k
Assign call: The VideoTerminal is assigned a call button.
R: 3.10 indicates how many call buttons have already been taught in and the max-
imum number that can be assigned.
In this example the VideoTerminal has already been assigned 3 call buttons;
a total of 10 call buttons can be assigned.
Provide internal call: An internal call of the VideoTerminal is assigned to a home
station or a door communication gateway.
Assign switching action: A switching action of the VideoTerminal is assigned to a
switching actuator.
S: 2.20 indicates how many internal calls have been temporarily stored.
In this example, 2 internal calls are temporarily stored by VideoTerminal; a total of
20 internal calls can be temporarily stored.
i
Internal call - switching action
The "Assign switching actions" function is only active if the programming mode is
active on the switching actuator. In this case no internal calls can be provided. The
active function in this menu is marked with "o".
22
In the "Assign" menu the VideoTerminal is
assigned components from the door com-
o
o
munication system (e.g. door stations,
home stations and switching actuators).
The exact work procedures for assigning
components from the door communication
system are described in detail from
Page 25.
Advertisement
Table of Contents
